Car Monitor 4.3 inch Reversing image Rear view Parking System Rear view Camera car electronic car detector revere image
4.3 inch TFT Display
Note: when the power supply to the monitor, Display is not starting. When there is a video signal input, the display will
1>Screen size: 4.3 inch
2>Aspect ratio: 16:9
4>Video system: NTSC/PAL compatible
5>Power supply: DC 12V-36V
6>Rated power: 3W
7>Supports car DVD, VCD, camera, and other video equipment
8>With 2 video input port, yellow video cable connects to car rearview camera, the white one connects to DVD or VCD When
parking the car ,the rearview image appears onto the screen automatically
9>With menu button, brightness/contrast/hue/ language is adjustable
10>No audio input or output.
11>Operating Temperature: -10°~+50°
1>Anti fog glass
2>Support PAL video system.
3>High grade of waterproofing: IP66.
4>High-definition and 150 degree wide viewing angle.
5>Applicable to variety of vehicles: car, truck, RV, etc.
6>Snap-in design, it is easy to install.
7>Its simple and modest design and small size won’t draw any attention.
8>It helps to avoid incidents and accidents abrasion well.
9>TV system: PAL
10>Horizontal Resolution: 420 TV lines
11>Effective Pixels: NTSC:510(H) * 492(V)
12>Minimum Illumination: 0.5 Lux
14>Sync. System: internal
15>S/N Ratio: >48dB
16>Electronic Shutter: 1/50 to 1/100,000 seconds, 1/60 to 1/100,000 seconds
17>Video Output: 1.0Vpp, 75Ohm
18>White Balance: Auto
19>Power: DC 12V
20>Current Consumption: 90mA
21>Operating Temperature: -20 to + 70?°C, 95% RH maximum
22>Storage Temperature: -40 to + 100?°C, 95% RH maximum
1>Connect the yellow video output connector to terminal display device.
2> Connect the black power input connector to power output device.
1> Original box: YES
2> Color: Black
3> Video Cable Length: 6.5m
4>Power Supply Cable Length: 1m
5>Camera size: 24*20mm
6> Net weight: 206g
7>Package weight: 222g